 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
kenmore elite he4 - control panel shows two lights but not working
I've had a Kenmore Elite HE4T Dryer for the past four years and it's been working fine without a glitch until recently. A week ago, my dryer stopped working. I pressed random buttons and somehow got it to start again but yesterday, it stopped completely and I haven't been able to restart it.
Now, the inside light still comes on but the control panel is almost completely dead (I say almost because three buttons are still lit up: "damp" indicator, the "normal cycle" button, and the "extra dry modifier" indicator). When I press certain buttons, these three lights go away, but otherwise, my panel seems unresponsive. I've tried drying the control panel in case there was any moisture (didn't work) and I drained the battery and restarted it (also didn't work). Does anyone have any suggestions as to what the problem may be or what I should do next? Thanks in advance! |
||||
Check out some similar questions!
My machine will not go into a cycle. The lights come on, when I push start it beeps and the lights come on but no action? What's up?
I have a kenmore elite he4 electric dryer, the interior lights come on when you open the doors, although none of the red lights on the control panel will light up. I checked the breaker by turning it on and off a couple of times. No change. I was going to check the Thermal fuse. Not quite sure...
This unit has had numerious problems, I have repaced the pwr supply twice now the unit is displaying a power failure and will not reset by pressing the start button which is what the manual tells you to do. God any suggestions on what to do?
For the life of me, I cannot determine how to remove the top Control Panel of a Kenmore Elite 110.24952300 Washing Machine. I want to hinge it back so I can remove the cabinet and access the pump. Am I missing the obvious?
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
