Ask Experts Questions for FREE Help !
Ask
    spvisd's Avatar
    spvisd Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Mar 4, 2007, 04:58 PM
    Kenmore Elite HE3 Beeps 3 times won't start
    Hello

    My Kenmore HE3 ELectric dryer model 110 82832 100 just stopped working. There is power and when I press a mode button the digital display shows the minutes, etc. When I press the start buttin it just beeps 3 times. Anyone with the same problem? Thanks
    jake4's Avatar
    jake4 Posts: 29, Reputation: 1
    New Member
    		  
    #2

    Mar 5, 2007, 08:37 PM
    Take the bottom panel off, three screws usually metric or torx, and the tech sheet is on the left in envelope, that might help
    doug238's Avatar
    doug238 Posts: 1,560, Reputation: 62
    Ultra Member
    		  
    #3

    Mar 24, 2007, 10:53 PM
    Diagnostic Guide Link
    I found service tech diagnostic guides (PDF format) during an online search. This includes instructions on putting the dryer into test mode in order to check switches, etc. Here are the links:

    Gas Dryer:
    http://www.servicematters.com/docs/w...%203980053.pdf

    Electric Dryer:
    http://www.servicematters.com/docs/w...%203979705.pdf
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore Elite HE3 Electric Dryer [ 1 Answers ]

My dryer turn off all by itself. An error code of E1 appears. We press start/cancel and start the dryer again. After a few minutes it shuts off again displaying the error code once again. Help... :eek:

Kenmore Elite HE3 Dryer Not Heating [ 1 Answers ]

I have a Kenmore Elite Dryer (electric) that is not heating. I pulled the toe panel so I could clean it out to see if that was the problem. After I cleaned it out I ran a short cycle and still no heat. I also noticed the heating coil did not change. Should these get hot, turn red during a drying...

View more questions Search