 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Kenmore elite gas dryer does not get hot
My dryer gets warm, but not hot. The burner runs for 30 - 90 seconds, then turns off. After a few minutes, it re-ignites and runs for a similar amount of time. The fan and exhaust duct are clean. I have replaced: the thermostat on the tube that surrounds the burner; the thermostat/moisture sensor and the fuse on the exhaust vent (just after the fan), and the gas coils. I can't find any problems with the ignitor - no cracks or anything. It is 5 years old. What is going on here, how do I fix it?
|
||||
Check out some similar questions!
Hi,I was wondering if anybody knew what may be causing my dryer not to heat
I've read everoyone's comments and have a similar issue. I've replaced the door switch which had a broken tab. Now when I press the start button, it buzzes (a little bit) and then clicks off. There's a slight smell of enamel as it might be the motor. How can I tell before getting a motor? ...
Kenmore Elite Gas Dryer Runs But No Heat and Won't Dry Model No.110.70932990
My kenmore elite gas dryer sometimes makes my clean clothes smell like gas. Any suggestions why? It is new I had the gas company come there is no gas leak. And sears was no help. Its very inconsistent as to when it happens not that offten but it does sometimes.
Hey I have a Kenmore Elite Gas Dryer about 4 years old with a dial timer , it shuts down about every 4 minutes and sometimes stays a running through the full cycle. After it shuts down I can restart the dryer with no problem , the motor sounds good... Thanks for any help Joey
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
