Ask Experts Questions for FREE Help !
Ask
    jmpask01's Avatar
    jmpask01 Posts: 1, Reputation: 1
    New Member
     
    #1

    Jul 5, 2007, 06:39 PM
    Kenmore Elite Dryer Model 110.74972301 no heat
    I have a dryer that runs but has no heat. The ignitor do not spark the gas to get the heat on. The model is 110.74972301. I had this on an older model and found a fuse on the back of the dryer that was an overload fuse. Replaced it and it worked. I can not find that on this dryer.

    Can you help?

    Joe
    esquire1's Avatar
    esquire1 Posts: 2,483, Reputation: 209
    Ultra Member
     
    #2

    Jul 5, 2007, 07:52 PM
    Have you tested the ignitor for continuity?

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore Elite Washer (Model#110.82873120) Spin Probs [ 5 Answers ]

I have the Kenmore Elite King Size Washer, Model#110.82873120. Last night it quit working on the "Spin" cycle. I can still hear and feel the cycle operating, but there is a "clicking" that goes on and the agitator doesn't spin, nor does it agitate during the cycle. The draining mechanism...

Kenmore Elite Dryer Model 110.63932102 will not heat [ 6 Answers ]

My dryer stopped heating although it runs. I confirmed I was getting 240volts at the source. I checked the continuity of the element, the thermal fuse and the thermostat and found that they were continuous. I have read that the thermistor might have something to do with it...

Washer Kenmore Elite Model 110.23022101 [ 2 Answers ]

Hello, My Kenmore Elite washer made a loud clicking noise when it got to the spin cycle. It appears that it will not spin or agitate. It will drain. Any thoughts before I call a repair man?

Kenmore Dryer - Model 110.96281100 [ 1 Answers ]

I have a Kenmore dryer - model 110.96281100 which stops mid-cycle or won't start at all. Removing the timing unit revealed a bit of black dirt which I cleaned. It worked fine for about 2-3 days but then went back to same old status - sometimes starting, sometimes not. I'm trying to figure out if...

Kenmore Elite Model 110 [ 1 Answers ]

The washing machine is not spinning, so I am attempting to replace the coupler. I am able to partially remove the front console, but I can not remove the main knob. I found instructions that say to hold the dial and turn timer knob counter clockwise, but this is not working. This should be...


View more questions Search