Ask Experts Questions for FREE Help !
Ask
    pickitwoody's Avatar
    pickitwoody Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Nov 15, 2008, 11:18 AM
    Kenmore elite drier
    I have a kenmore elite drier and when I push the start button in it starts but as soon as let go it stops. I put duct tape over the button and let the machine go for about 40 minutes, and it didn't even warm up. What do I do?:confused:
    drcool299's Avatar
    drcool299 Posts: 26, Reputation: 3
    New Member
    		  
    #2

    Nov 15, 2008, 10:12 PM
    You have to open the housing and check for thermal overloads being open circuit.

    These overloads trips due to over temperature. These would prevent the units from heating up.

    About the push button issue, if you find a thermal overload being open, it might solve both problems.

    If not, let me know and we will trouble shoot it further.

    Tnx 4 using AMHD,

    Drcool :)
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Model # of Kenmore Elite Catalysts Washer set to Kenmore 110.60936990 dryer from 1999 [ 3 Answers ]

I am experiencing weird problems with my top of the line Kenmore Elite Catalysts washing machine. I bought the washer and dryer as a pair for about $1700 in 1999. The dryer model # is 110.60936990 but the sticker has worn off the washer so I do not know the model #. I think it could be...

Kenmore elite dw won't run [ 2 Answers ]

Model 665.17464300. Push wash and start and nothing happens,@ 30 seconds and wash lite goes out. When in diagnostic mode, it will run through sequence till ligthts "WASH, SENSE AND QUICK RINSE" come on, then unit stops... nothing [email protected] Thanks

Kenmore elite He3 won't do anything [ 1 Answers ]

My kenmore elite he3 dryer seems to be dead. I can push any button and nothing happens.

Kenmore elite H3 [ 3 Answers ]

My Kenmore ELITE H3 washer will re-fill with water on it's own. After the wash cycle has completed, I take the clothes out and place them in the dryer. If I do not use the machine again the machine will very very slowly start to fill with water.

View more questions Search