 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Kenmore Elite Dishwasher 13922kd12 not running cycle though lights cycle through
The dishwasher will not run. No matter what cycle you choose the lights will sequence in as if a complete cycle in less than 2 minutes. I have checked latch for contact. Made sure water is going to unit all to no avail.
Any ideas |
||||
Check out some similar questions!
I have a Kenmore Elite dishwasher with "Sensor ATC" and "Ultra Wash" and "Quietguard Elite" across the front of the appliance face. It has worked perfectly until yesterday. It will not start on any cycle. I CAN get it to drain by hitting the CANCEL button. I have tried to get it to start a FAVORITE...
My kenmore ultra wash dishwasher stopped during cycle. There are no lights lite on panel. What can I do?
My Kenmore dishwasher (just under 4 years old) stopped working today... the "cycles" lights on the left all turn on still, but the "options" lights on the right (which includes the start button) won't turn on, which means I cannot start the dishwasher. I made sure the child lock was off, and reset...
I have turned up the hot water heater to 150 degrees. I have run warm water before starting dishwasher. Dishes are clean. Another expert said it was a control panel but the cycles work, it just takes a long time.
I have a 2 drawer Kenmore elite dishwasher. I cannot clear the lock cycle. I have cut the power to the dishwasher, but that did not clear the lock cycle. I have tried hitting several different pads on the dishwasher, but nothing works.
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
