Ask Experts Questions for FREE Help !
Ask
    john-debbie's Avatar
    john-debbie Posts: 1, Reputation: 1
    New Member
     
    #1

    Aug 27, 2007, 05:37 PM
    Kenmore Dryer Runs But Does Not Heat
    My Kenmore Dryer, Model #96284100, was manufactured for Sears. The dryer runs but does not heat. The door panel indicates there are two fuses in the main panel. How do I disassemble the dryer to check/replaces the two fuses?
    esquire1's Avatar
    esquire1 Posts: 2,483, Reputation: 209
    Ultra Member
     
    #2

    Aug 27, 2007, 05:45 PM
    Remove 2 screws in the lint screen section. Remove the screws on the back panel. YOu will see 2 thermostats and a thermal limit. Disconnect a wire from each and test for countinuity. If none, replace, they are bad. Check the heating element the same way. DISCONNECT THE POWER FIRST FOR Safety.Another cause for non heating is a clogged vent hose. Check it from where it exits the dryer to where it exits the house

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kennmore Dryer Runs But No Heat [ 1 Answers ]

I have an electric Kennmore Dryer DWSR-ELE-2406028-CV54 that seems to run OK, but the heat is not coming on. There are no blockages on the vent and the filter is clean. What can you suggest?

Kenmore elect. Dryer runs but does not heat [ 1 Answers ]

Approximately 130V between each of the element terminals and ground, replaced element but no heat. Other checks; new high limit t'stat, operating t'stat shows 7 ohms, element shows 10ohms. Can trace voltage all the way to the element and the element is new. Out of ideas, need help.

Clothes dryer runs, but does not blow heat. [ 1 Answers ]

Is the problem one of the thermostats and if so, which one? Thanks..

Kenmore dryer runs but does not heat [ 3 Answers ]

My Kenmore dryer just stopped heating but it runs. The model number no is 110.62994101. I need help on how to fix it. If possible with diagram on How to change any part.


View more questions Search