 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
I recommend you pull it out and remove the access plate near where the cord enters the machine, once removed check that the fusable links have not burned out. Follow the wires from the screw terminals into the dryer, there should be two links near the screw terminals, they are made of a white metal and have somewhat of a dogbone shape. If they are melted in half you will need to go further into the dryer to figure out why. Clean out the inner cabinet and inspect the heater elements, manny times excessive debris(lint) builds up on the elements causing the fusable links to blow. If your fusable links are intact your timer switch is likely bad.
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
I have a Kenmore 70 series electric dryer. The drum is not turning. I have taken the drum out, the tension on the belt seems to be tight enough and no noticeable damage.
I have an older Kenmore 80 Series dryer. The drum stops turning after it runs for a while (5-10 minutes). It sounds like the motor is still trying to run before a safety switch shuts it off. After I let it rest for a while it starts running again. The belt is still in tact but looks old but has...
Kenmore elite dryer 110.6808 is heating, spinning but not blowing. We have checked for blockage but see nothing in the screen, vent hose. Where else and what else could it be?
Kenmore dryer 80 series what parts are needed when dryer stops turning ?
The motor on my dryer turns on but it does not spin. Do you know what might be wrong with it?
View more questions Search
|
