Ask Experts Questions for FREE Help !
Ask
    kjnk's Avatar
    kjnk Posts: 3, Reputation: 1
    New Member
     
    #1

    Aug 15, 2008, 04:58 PM
    Kenmore dryer not heating enough
    My kenmore dryer will start heating, igniter comes on, gas lights and burns for a while. Then the flame stops. After a short while, the igniter comes on again, but no flame starts. I smell no gas. The igniter turns off and the dryer continues to just tumble with no heat. I've cleaned the lint catcher and the exhaust hose for clogs and found none.
    esquire1's Avatar
    esquire1 Posts: 2,483, Reputation: 209
    Ultra Member
     
    #2

    Aug 15, 2008, 05:41 PM
    Check the coils. More than likely they are bad and need replaced. Not expensive and easy to fix
    kjnk's Avatar
    kjnk Posts: 3, Reputation: 1
    New Member
     
    #3

    Aug 16, 2008, 07:19 AM
    Quote Originally Posted by esquire1
    Check the coils. More than likely they are bad and need replaced. Not expensive and easy to fix
    The coils would be underneath the drum also?
    esquire1's Avatar
    esquire1 Posts: 2,483, Reputation: 209
    Ultra Member
     
    #4

    Aug 16, 2008, 09:06 AM
    Yes, they work in conjunction with the gas valve
    kjnk's Avatar
    kjnk Posts: 3, Reputation: 1
    New Member
     
    #5

    Aug 16, 2008, 11:36 AM
    Quote Originally Posted by esquire1
    Yes, they work in conjuction with the gas valve

    OK, that sure sounds like the problem. Thanks!

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore Dryer not heating [ 1 Answers ]

I have a Kenmore electric dryer that I recently replaced the thermostat on (2 weeks ago). Now the dryer has stopped heating again and cuts off after about 10-15 minutes during a pre-programmed cycle, without heating up. Any suggestions as to what the problem might be. Thanks for the help.

Kenmore Dryer not heating [ 3 Answers ]

I have a Kenmore Dryer model 110.73022100 that runs but doesn't heat up. I have replaced the ingnitor, thermostate and thermostate fuse and nothing has helped. I have detached and check the gas line which works fine but there is no ingition of the pilot when the dryer is turned on. Any...

Kenmore Dryer not heating [ 1 Answers ]

I'm working on my mothr in laws 10 yr old kenmore dryer that runs, but the heat element does not get hot. I have taken the element out found no breaks in it, it ohms good. I have 110 volts on both wires to the element. What am I missing ?


View more questions Search