 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Kenmore dryer no heat model 110.66712
The dryer runs, but does not heat up. It also never shuts off on timed drying. I found what looks like a burned out resistor, a ceramic bar covered in hard plastic, spliced in the orange wire between the timer and the heater, per schematic. The plastic cover is split open and looks melted. Would replacing this part fix the problem, or is it a result of another failure? What should I look for?
|
||||
Check out some similar questions!
Kenmore Model 110 78942802 gas dryer won't heat
[ 0 Answers ]
I've cleaned out the dryer and it runs and turns fine it just won't heat. I'm not sure what to look for or how to fix this problem. Thanks for your help
Kenmore dryer runs but won't heat (Model # 110.76902690)
[ 1 Answers ]
Our dryer runs but won't heat. Also, the inside bulb does not turn on when the front door is opened. I believe the two problems appeared simultaneously. Kenmore Model #: 110.76902690 Equipped for natural gas. The instruction on the dryer says "240 Volt dryer operates on two fuses in the...
Kenmore Dryer Model # 110.96591220 Won't Heat
[ 5 Answers ]
Dryer won't heat and I have continuity on all the reachable parts. Not getting juice to the coil during operation. I should have 0.00 OHMS for normal operation, tested when cool on all the parts, right? Thanks for your help.:eek:
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
