Ask Experts Questions for FREE Help !
Ask
    Chanda Hunter's Avatar
    Chanda Hunter Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 20, 2009, 06:35 PM
    Kenmore dryer
    I have a kenmore 70 series dryer. I was cleaning the lint trap when a small medicine bottle accidentally fell down the trap chute. How do I remove it? Will it cause I fire if I try to run the dryer?
    Flying Blue Eagle's Avatar
    Flying Blue Eagle Posts: 2,056, Reputation: 225
    Ultra Member
    		  
    #2

    Jun 20, 2009, 10:47 PM

    Chanda hunter - #1- was the medicien bottle "plastic or glass" ? If it was plastic there is a very very slight chance of that happing;; #2- Is your lint trap on the top right side or on the inside the door? ; #3- if on top right .side, take and remove the screws that hold the lint trap duct in place ,then pull it ouy;NOTE- on some modles you have to remove the dryer tub to remove the duct;#4- I would try this first- Pull dryer out from the wall ;;unplug the power cord;; #5- Remove the air vent hose from the dryer ,reach inside the vent hole and see if you can feel the bottle,if so grab it and pull it out; if you can't ,then remove the vent duct from the back of the dryer;;
    Good luck and I hope that I have helped you with your problem ; Have a great day and GOD BLESS F.B.E.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Model # of Kenmore Elite Catalysts Washer set to Kenmore 110.60936990 dryer from 1999 [ 3 Answers ]

I am experiencing weird problems with my top of the line Kenmore Elite Catalysts washing machine. I bought the washer and dryer as a pair for about $1700 in 1999. The dryer model # is 110.60936990 but the sticker has worn off the washer so I do not know the model #. I think it could be...

Does a Sears Kenmore 90 gas dryer have the same fuses as an electric dryer? [ 1 Answers ]

Hello I have a sears kenmore 90 series gas dryer. And I was wondering if it has the same kind of fuses as an electric dryer? Because everything seems to work but it does not heat. And I would like to know if it has the same fuses as an electric dryer?

Kenmore he3 dryer [ 1 Answers ]

My dryer occasionally stops before clothes are dry, sometimes displaying an E1 code. My manual says to call a repairman for this. Where can I find definitions for the E codes? I think it is probably the thermostat or moisture sensor. Is there anywhere I can order the parts, with installation...

Kenmore Stackable Dryer/Washer Dryer Squeaks [ 1 Answers ]

We have developed a squeak in the dryer. It does heat okay and clothes are tumbling well. I went online to get the schematics of the dryer drum, but would not know where to start as parts are numbered and not named. Help:confused:

View more questions Search