Ask Experts Questions for FREE Help !
Ask
    susan_frazier's Avatar
    susan_frazier Posts: 1, Reputation: 1
    New Member
     
    #1

    Jul 11, 2008, 05:41 PM
    Kenmore dryer
    I have a Kenmore dryer model number 110-66732500 and it seems the heating element has went out on it. I see this is fairly easy to replace but my dryer is only about 3 years old and is used for a single person household, therefore is used very rarely. Is it common for these elements to go out so quickly. Thanks
    KISS's Avatar
    KISS Posts: 12,510, Reputation: 839
    Uber Member
     
    #2

    Jul 11, 2008, 06:16 PM
    Heating element failures will fall into the following categories:

    1. Too hot because of venting problems
    2. Loose connections (From the panel to inside the dryer)
    3. Atmospheric impurities (e.g. Damp location)
    Credendovidis's Avatar
    Credendovidis Posts: 1,593, Reputation: 66
    -
     
    #3

    Jul 12, 2008, 05:08 AM
    Further to K.I.S. reply : there is also the possibility of sudden equipment failure. A heater element can - specially when it gets too hot (K.I.T.'s overheating due to lint blockage) - just break down without any specific cause. Do not forget that a heater element is subject to great stress.
    And although failure of electric material can normally be expected early in it's life and much later due to aging, it still is possible at any time in between. They call that the "bath tub curve". Starting with a sharp vertical peak at first use, than a long horizontal period of low failure, and than a slow curved line upwards due to fatigue.

    All in all : you are just unlucky. Fortunately a heating element is not too expensive.

    :)

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Model # of Kenmore Elite Catalysts Washer set to Kenmore 110.60936990 dryer from 1999 [ 3 Answers ]

I am experiencing weird problems with my top of the line Kenmore Elite Catalysts washing machine. I bought the washer and dryer as a pair for about $1700 in 1999. The dryer model # is 110.60936990 but the sticker has worn off the washer so I do not know the model #. I think it could be...

Kenmore he3 dryer [ 1 Answers ]

My dryer occasionally stops before clothes are dry, sometimes displaying an E1 code. My manual says to call a repairman for this. Where can I find definitions for the E codes? I think it is probably the thermostat or moisture sensor. Is there anywhere I can order the parts, with installation...

Kenmore dryer age [ 1 Answers ]

How old is my kenmore gas clothes dryer model 110 87982800?

Gas dryer/ Kenmore [ 1 Answers ]

My gas dryer stops after a few minutes and "E1" shows in the time remaining window. I can't find my manual to trouble shoot this. It is a Kenmore Elite series HE3. Thank you for any help you can give me.

Kenmore Stackable Dryer/Washer Dryer Squeaks [ 1 Answers ]

We have developed a squeak in the dryer. It does heat okay and clothes are tumbling well. I went online to get the schematics of the dryer drum, but would not know where to start as parts are numbered and not named. Help:confused:


View more questions Search