 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
My kenmore dishwasher won't start?
It is the kenmore ultrawash . Regardless which button I press, the normal wash button starts to blink, if I press cancel, it will alos start to blink together. Couple of days ago, my wife tried to turn it on and the power went down in the house (not sure if the whole street and wasn't at the very beginning of her attempt to start it) then I tried to start it when I came home, and it will start and do few cycles then stop and I press buttons randomly then it will do a cycle.. etc. Not sure if all make sense but now it is just blinking the green and red button and won't start. Any help..
|
||||
Check out some similar questions!
I have a Kenmore Ultra Wash dishwasher that will not start when pushing the start pad location. It will pump when put on the Cancel/Drain button, but will not start after that. It does have power, or the pump would not run during the Cancel/Drain cycle. The washer was purchased in Jan 20, 2006...
My kenmore dishwasher model #16769000 will not start the normal wash cycle light goes off in a few seconds and nothing happens. Tried unplugging for 1 hr, but did not work. Any help greatly appreciated. Teena
My dishwasher is Kenmore model 665.15812990. It won't start at all. I've tested the door hinge with my multimeter and it shows continuity when engaged. I alo tested the thermal fuse which shows continuity between the leads. Could the fuse still be the problem or are there any other things to...
I have a model 587.1551590 and it won't start. It was relunctant for a few times.. after flipping switches and turning dial managed to get it started but don't know which switch or button "fixed" it tempararily... When it did start the wash cycle worked fine. Now I can't get it start at all. I...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
