 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Kenmore Coldspot 52292100 won't cool
My starter relay and overload switch burned up. I hardwired the wires to the compressor to see if it still worked. The fan and compressor kicked on for awhile then stopped. I unplugged it and waited for my new parts, (8201786). Today I installed the relay and overload switch. Inside the refer the lights work and I hear a fan inside the refer. The compressor cooling fan won't turn on, though, and the compressor isn't getting warm at all. Neither the fan nor the compressor are tuning on. Did I burn up a different switch somewhere?
|
||||
Check out some similar questions!
My fridge stopped cooling and I noticed that the compressor keeps going on and off and it is very hot
I have a side by side kenmore coltspot and it's getting very hot in the center where the 2 doors meet when closed. Its so hot I'm afraid its going to melt the rubber seal on each door
My kenmore coldspot top freezer refridgerarator isn't cooling as much as it should in the freezer but it is freezing everything in the lower compartment which isn't suppose to be freezing. I heard its some tubes are clogged , dirty or frozen. Where do I find these cfrozen coils or tubes?
I just purchased a used kenmore coldspot, it was working and I just put it in my house and now it does not seem to be cooling, does it take a long time to re cool, it has been unplugged for 2 weeks.
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
