Ask Experts Questions for FREE Help !
Ask
    DustyRoseAZ's Avatar
    DustyRoseAZ Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Aug 12, 2012, 08:44 PM
    Kenmore (80 series) won't fill
    Was working perfectly last time I used it, but now won't begin to fill with water. If I put it on spin, it tries to drain (even though there is no water in it)
    drtom4444's Avatar
    drtom4444 Posts: 3,282, Reputation: 145
    Ultra Member
    		  
    #2

    Aug 13, 2012, 12:29 PM
    The water level switch either has a stopped up hose or the contacts are welded together. Here are some manuals: https://dl.dropbox.com/u/8010163/Und...c%20washer.pdf
    https://dl.dropbox.com/u/8010163/Whi...%20washers.zip
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore washer 70 series will fill sometimes [ 0 Answers ]

The washer will fill normal sometimes and other times it comes out at a trickle any thoughts on this.

Kenmore 70 series washer overfilled - now won't fill [ 0 Answers ]

My Kenmore 70 series washer lid switch broke so I took the cabinet off and put the switch back together, problem solved. Went to do a load of laundry, came back 10 minutes later and it was totally overfilled. The pressure hose at the bottom/side of the tub had not come loose so I don't know how...

Kenmore Washer (series 80) won't fill with water [ 5 Answers ]

Starts, stops, spins, and flushes out water appropriately - but won't let water in, neither hot nor cold, on any program / cycle. Any ideas? Need to fix it myself to keep housepeace...

Why does my Kenmore 80 series only fill part way? [ 0 Answers ]

No matter what setting I put my washer fill on it only fills 10 inches

Kenmore 70 series, won't fill with water, drains out as fast as it's put in [ 0 Answers ]

I have a kenmore series 70 washer, has good water flow to the bowl, but the water runs out as fast as it is put in. it's like the dump valve is stuck. What is causing the issue so I can replace it. Thanks Sandy

View more questions Search