Ask Experts Questions for FREE Help !
Ask
    dkjewels's Avatar
    dkjewels Posts: 1, Reputation: 1
    New Member
     
    #1

    Aug 10, 2008, 04:10 AM
    Kenmore 80 Series-Smells
    My washing machine smells. I have tried running a cycle with bleach, wiped out the drum and still it has a musty smell. When I wash clothes I need to remove them immediately and even then they have that musty smell. I ordered AFRESH online but do not see how this will help if bleach didn't. I think it must be behind the drum or a filter to clean, which I do not see.
    Any suggestions?
    The washer is only 5 years old
    Debbie
    Credendovidis's Avatar
    Credendovidis Posts: 1,593, Reputation: 66
    -
     
    #2

    Aug 10, 2008, 04:37 AM
    Hello Debbie !

    The only parts where smell can develop are :

    1 - in the soap box, where the water enters the machine. But it is only passing through there (not very likely).

    2 - in the drum itself : the water is pumped out of there at the end of each cycle (not very likely).

    3 - in the pump section : water will always remain there, and bacterial and other growth is possible. Have you checked the pump section and the filter there? Is it clean? I expect something to be stuck there...

    4 - in the drain section : although the pump section should provide a water lock, it is possible that the smell enters the washing machine that way. Smell the drain pipe it if contains the same smell. And if so check the pump section again to see what causes the water lock to disappear.

    Note : keep between washes the door of the washer open, so that dampness (the cause of fungus development) remains minimal.

    If needed you can always come back to the board and discuss your findings!
    Just let me know by private mail (click on my handle and follow instructions) and I will return here to reply.
    If this helps solving your problem, than please rate this reply.

    Success !

    :)

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore series 70 [ 1 Answers ]

My washing machine model is kenmore 70 series and serial number is SM 971 0804-A. The belt was broken. I ordered another one. I tried to unscrew and put the belt back in but couldn't because it is bigger than the hole. Is there any way that I am able to get the manual? Any suggestions will be...

Kenmore 70 series [ 2 Answers ]

Have a Kenmore 70 (110.20722990 ) that will not spin out at the end of a regular cycle. If I rotate the dial 360 to spin and push time dial in it will spin out. I should also say, I have to open and close the lid just before pushing in the dial at spin. Just had a new switch put in this year for...


View more questions Search