Check out some similar questions!
Kenmore series 80 dryer timer keeps dryer running through cycles
[ 2 Answers ]
Our 5 year old series 80 kenmore dryer keeps running through all timer cycles. You have to leave door open or pull the plug to stop it. Is this a major repair or part cost?
Kenmore Dryer (90 series) - Need access to timer panel
[ 0 Answers ]
How do you gain access to the timer? Having trouble getting in to the electronic bridge (where the timer and other knobs are) to replace the timer. Have removed screws, but still can't access the timer.
Kenmore 80 Series Dryer not heating
[ 1 Answers ]
On all settings, the dryer heats up slightly, takes 60 minutes. To dry a few pieces of clothing Is this my heating element??
Kenmore Dryer (90 Series) not heating up
[ 1 Answers ]
My Kenmore Dryer (90 Series) is not heating up. I have replaced the Hi-Temp thermostat and thermal cut-off devices. The coil is good (~10.1 ohms). When I detach one of the wires from the circuit, I measure about 80 volts (AC) between the heating coil and the operating thermostat or ~110 v... View more questions Search
Add your answer here.
|