Ask Experts Questions for FREE Help !
Ask
    richenuff's Avatar
    richenuff Posts: 1, Reputation: 1
    New Member
     
    #1

    Aug 1, 2012, 08:07 PM
    Kenmore 417 front loader washer won't wash or spin.
    Our Kenmore model 417-44042400 front loading washing machine will not wash or spin. The pump works to remove water, but since it won't spin, the emptying is incomplete. It does fill with water. I checked the drive belt and it is OK. The inner tub turns with the outer tub. There is a slight buzzing noise when the cycle is calling for washing or spinning. The sound seems to coming from the control panel.
    drtom4444's Avatar
    drtom4444 Posts: 3,282, Reputation: 145
    Ultra Member
     
    #2

    Aug 2, 2012, 06:28 AM
    Here is a manual that may help: https://dl.dropbox.com/u/8010163/Ken...sher_Elite.pdf
    You are going to have to get a meter and track down the problem. There is no way to fix it any other way because there are too many electrical parts. Start by checking the solenoids that initiate the spin cycle. The coils on the solenoids should have between 500 and 3000 ohms. Look for any burned or loose connections, too. It should be an easy fix with a meter. Here is an instruction manual for using a meter: https://dl.dropbox.com/u/8010163/Whi...e%20Manual.pdf
    Once you get good with a meter you can fix almost anything.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore Front Load Washer #417.41042000 won't spin, does drain [ 9 Answers ]

Hi, When I bought my machine, the previous owner offered the following description: It is about 2.5 years old. We had some problems with it spinning the proper speed after moving it. The repair people told us it was due to using too much soap or being imbalanced. Had it repaired a couple...

Kenmore front loader won't spin [ 0 Answers ]

Kenmore front load washer: 4172952990. Does not spin. Clicks... at the beginning of a cycle it will spin for a few slow spins, then nothing. Had the Sears technician in. Said that it was the Speed control. Bought one from Sears, installed it myself. The machine still won't agitate......


View more questions Search