Ask Experts Questions for FREE Help !
Ask
    Louise2875's Avatar
    Louise2875 Posts: 2, Reputation: 1
    New Member
     
    #1

    Aug 7, 2010, 11:13 AM
    My Kenmore 300 series #W10025650 washer does not spin! What's the problem?
    Motor and timer are fine, goes through cycle but does not spin. When machine completes cycle the clothes are filled with water.
    kryostar's Avatar
    kryostar Posts: 108, Reputation: 11
    Junior Member
     
    #2

    Aug 8, 2010, 11:52 AM

    It could be the solenoid valve that energizes and opens,but most likely the pump is bad that pumps water out of drum before spin cycle can start.check pump.good luck

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore 80 Series washer doesn't spin... [ 1 Answers ]

I have a Kenmore 80 Series washing machine. Yesterday it stopped spinning. It fills up with water and then makes this fast clicking noise when it should start spinning or agitating. Any ideas on what might be the problem?:confused:

Kenmore washer 70 series humming at spin cycle - won't spin [ 4 Answers ]

RE: kenmore 70 series model 110.20712990 Type 111 top load washer. Won't spin. Humming noise and a little burning/hot smell when supposed to be spinning. Bypassing the lid switch did not correct the problem. Changed out the motor coupling with no luck... still a humming noise but no smell.

How do I change timer in kenmore 300 series washer [ 2 Answers ]

Need to get old timer out of washer to replace it how do u get the washer open

Kenmore 80 Series washer won't spin [ 2 Answers ]

I have an 80 Series Kenmore washer, model number 110.29892990 that will not spin. The washer makes noise like it wants to spin but does not. The water is still draining. Replace or repair? If repair, how?


View more questions Search