 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
My kenmore 300 electric dryer doesn't heat. What to do?
Kenmore 300 model 68322700. It runs but won't heat. It is about 2.5 years old. A few months back it happened for a first time. It was a thermal fuse. Pretty easy. This time around the fuse is fine. When I check for a continuity on the heating element switches all the way down under the shell the light is very weak, dim. Also there is a thermostat on the bottom of the thermal fuse . It has four wires, two red ones and two purple ones. The purple ones don't seem to light up my tester. Which one of these things could be a problem to fix? How about the timer, could it possibly stop the dryer from heating? My laundry is piling sky high. Please help asap? Thanks
|
||||
Check out some similar questions!
I have a Kenmore Elite Heavy Duty (electric) dryer that has no heat even though running. I had the heating element thermal cutoff replaced last year when I had a similar situation. Not sure what the possible cause may be this time around. Any suggestions please.
I tried to by pass the thermal fuse, still no heat, then I change the heat element still no heat??
I have a Kenmore Elite Electric dryer (model# 110.63952102). The dryer runs without heat. The relay seems fine. I would like to check the heat element and I saw it located on the right side from the front panel. How can I take it out and how do check it? Thanks
This is my first dryer and soon as 3 year warranty goes out it start to act up. I did cut off/on both the breakers to see if it help, but apparently not other than that everything works. I never look inside the dryer before so I have no idea what the thermostat nor a fuse look like and where...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
