Ask Experts Questions for FREE Help !
Ask
    blueangelky's Avatar
    blueangelky Posts: 1, Reputation: 1
    New Member
     
    #1

    Jan 16, 2010, 01:38 PM
    Kenmore 16032 won't dry
    Have a Kenmore Ultra 1603 that we replaced the element on. It worked fine for a few times. Now the cycle stops right before 'heated dry', leaving water in the bottom. Is my thermostat bad? Or what do I do. I can reset it & it'll start the cycle. The dishwasher is about 3 yrs. Old.
    perryjd's Avatar
    perryjd Posts: 21, Reputation: 1
    New Member
     
    #2

    Jan 16, 2010, 02:39 PM

    I would check the power source first, if it has a plug in or hardwired, plug could be partially unplugged, then check with a meter the voltage to see if you are getting 120 volts. If that all checks OK you probably have a bad control unit.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore finishes the 'timed dry' cycle then moves to the 'air dry' cycle [ 0 Answers ]

Kenmore dryer keeps running through all timer cycles. You have to leave door open or pull the plug to stop it. Is this a major repair or part cost? Kenmore finishes the 'timed dry' cycle then moves to the 'air dry' cycle. What gives? -David

Kenmore Dryer won't Dry [ 2 Answers ]

I saw similar postings on this all within the last 2 week and wonder if the problem is with Kenmore dryers generally. I have a Kenmore Elite dryer which I noticed about 2 weeks ago didn't dry properly but thought it was the amount of load. It has gone worse this week with the cloths almost as...

Kenmore dishwasher won't heat dry [ 1 Answers ]

My Kenmore Elite model 665 doesn't seem to heat dry. Is there a way to check this?

Kenmore Dryer stops before dry [ 6 Answers ]

MY Kenmore Elite Dryer, Model 110.63932101 runs normal and then stops before clothes are dry. When you push the button to restart it just beeps. After awhile it will restart but then may shut down again before dry, and you have to wait again. Any idea? I've done some of the diagnostic's on the...

Kenmore dryer-not dry enough [ 3 Answers ]

I have a kenmore HE2 electric dryer that does not dry clothes completely. Usually have to run the clothes through twice in order to get it dry. Much thanks in advance


View more questions Search