Ask Experts Questions for FREE Help !
Ask
    Mark Campbell's Avatar
    Mark Campbell Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 22, 2015, 04:52 AM
    Ken more ultra dish washer
    It's in a lock mode I cut breaker off and let it reset then ran a cycle a and it did then went back to lock mode what can I do
    talaniman's Avatar
    talaniman Posts: 54,325, Reputation: 10855
    Expert
    		  
    #2

    Jun 22, 2015, 09:39 AM
    While I suspect the control/keypad console is stuck or defective, the proper way is to test it with an ohmmeter with precision probes.

    Do you have a model number for a more accurate diagnosis?
    drtom4444's Avatar
    drtom4444 Posts: 3,282, Reputation: 145
    Ultra Member
    		  
    #3

    Jun 22, 2015, 10:08 PM
    You probably have a bad capacitor on the control board. See: https://www.youtube.com/watch?v=flzhfmIIYpM
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

I have a ken more ultra washer model 7635. [ 0 Answers ]

The dishwasher won't respond to any of the ways it says. Any ideas. Thanks

Dish washer ge [ 0 Answers ]

I have a ge model gsd6200j00ww dish washer The water is coming out the spinner arm weakly and it does not turn. I have removed the water tube assy. Going up to the middle and top spouts .They are clean no obstruction. I removed the bottom spout/ spinner arm and there is no trash in there as well. I...

I have a Kenmore Ultra III dish washer. Recently a glass broken inside. It is clogg [ 1 Answers ]

My dish washer is not draining since a drinking glass broke inside. I picked broken pieces which were in the bottom. However, I believe more small glass pieces inside are blocking the drainage of water. I need to know how can I remove the entrapped pieces. It is Kenmore Ultra Wash III dish...

View more questions Search