Ask Experts Questions for FREE Help !
Ask
    bfoxy2's Avatar
    bfoxy2 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Sep 17, 2006, 08:06 PM
    Jenn-air Gas Cooktop, Igniter Malfunction
    I need help with a Jenn-Air Gas Cooktop, with all knobs in the off position, one of the igniters, sparks once, every 45 seconds on it's own. I have tried re-adjusting the knob to the off position but, this has no effect. Any ideas, to this mysterious spark? Thanks in advance, for any suggestions.
    Bfoxy2
    mr charly's Avatar
    mr charly Posts: 2, Reputation: 1
    New Member
    		  
    #2

    Nov 5, 2006, 07:04 PM
    Quote Originally Posted by bfoxy2
    I need help with a Jenn-Air Gas Cooktop, with all knobs in the off position, one of the igniters, sparks once, every 45 seconds on it's own. I have tried re-adjusting the knob to the off position but, this has no effect. Any ideas, to this mysterious spark? Thanks in advance, for any suggestions.
    Bfoxy2
    Did you ever fix the problem? I've got the same thing happening to my GE stove top.
    labman's Avatar
    labman Posts: 10,580, Reputation: 551
    Uber Member
    		  
    #3

    Nov 5, 2006, 08:15 PM
    Likely the switch is sticking. Replace it.
    cozyk's Avatar
    cozyk Posts: 802, Reputation: 125
    Senior Member
    		  
    #4

    Nov 15, 2008, 08:00 AM
    Quote Originally Posted by bfoxy2 View Post
    I need help with a Jenn-Air Gas Cooktop, with all knobs in the off position, one of the igniters, sparks once, every 45 seconds on it's own. I have tried re-adjusting the knob to the off position but, this has no effect. Any ideas, to this mysterious spark? Thanks in advance, for any suggestions.
    Bfoxy2
    I am having the same problem today. About every 10 sec. all 4 burners at the same time make a little spark. What to do??
    kathleen5's Avatar
    kathleen5 Posts: 1, Reputation: 1
    New Member
    		  
    #5

    Aug 14, 2011, 09:57 AM
    We are having a similar problem. Ours constantaly clicks when the burners are lower than 6. Did anyone find an answer?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

OBD code P0335 (crank position A circuit malfunction) [ 3 Answers ]

Hi, I've been having problems with a 1.8 nissan primera (petrol) engine light is on OBD returned this fault. Has had crank sensor replaced which improved things slightly, but it's still not 100% and engine light is still on. The nissan dealer cleared the code memory and re-checked the OBD. Same...

Jenn Air Range Hood [ 3 Answers ]

I bought a new Jenn-Air hood (JXT5830) to install over the range in my kitchen. I then connected the wires as per the instructions, but none of the front lights or functions worked. The company is the worst imaginable-- no help at all to installers, so I must rely on my friends here. I connected...

Cooktop 220V reduces to zero under load [ 3 Answers ]

While replacing one of the cooktop switches in an old Tappan cooktop, the voltage across L1 and L2 is 220 volts while switch is off. When any of the switches is on the voltage drops to under 1 volt across all the L1 and L2 on all of the switches in series and does not deliver any voltage to across...

Carrier hsp gas valve/igniter control [ 2 Answers ]

Please help!! I have a carrier gas pack with a hsp valve/ignitor and after going through the ignition procedure I get nothing. I have replaced the inducer board and the inducer fan does work, however that is the only thing that appears to work. BEFORE spending another 150 bucks on the hsp...

Internet Explorer Malfunction [ 1 Answers ]

My IE is not working, and as a result I cannot update any programs I have on my PC and I cannot add new programs. I think I accidentally deleted some files that affected IE. I ordered an IE disk, and tried to install it with no luck. I tried to do it from the Microsoft website with no luck. ...

View more questions Search