Ask Experts Questions for FREE Help !
Ask
    ritagayle's Avatar
    ritagayle Posts: 1, Reputation: 1
    New Member
     
    #1

    Oct 21, 2009, 11:53 AM
    Icemaker won't fill
    The refrigerator is Model #:10657532790, Sears Kenmore, made in 08-97. The water intake valve has been replaced and the icemaker still will not make ice.
    The arms appear to be moving, as if they were dumping ice, and you can hear it cycle as if it were taking in water.

    However, there appears to be no water getting into the unit. What's the next step?

    Thank you.

Check out some similar questions!

Toilet continues to fill but it does not fill [ 4 Answers ]

My toilet continues to fill and fill but it never does get filled. I googled this and found a lot of help and have searched this forum but I couldn't find an answer. - I noticed a leak at the top of the tower which has the rod then the ball thing attached to it, I tightened those screws at the...

Kenmore/Whirlpool icemaker won't fill [ 1 Answers ]

Kenmore/Whirlpool SxS refrigerator; ice maker won't fill. The service sheet I found in the kickplate said to check ohms from test points L-M (motor). Reading was about 4065 ohms with power off, not 8800 as suggested on the sheet, but the module was left on the icemaker. Does it need to be...

Bathtub Dap-out -- to fill or not to fill in? [ 5 Answers ]

Here is my situation: I have a house on a concrete slab that unfortunately sits right on top of an underground spring (we have several springs on the property). This was discovered by finding 4-6 inches of water throughout the entire finished basement (and destroying everything down there) right...

Icemaker not cycling. [ 2 Answers ]

Ice is frozen in tray and "arm" is down/on. Maker is not cycling. Simple solution?


View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.