Ask Experts Questions for FREE Help !
Ask
    jeff shiau's Avatar
    jeff shiau Posts: 3, Reputation: 1
    New Member
     
    #1

    Jun 24, 2013, 08:22 AM
    How do I troubleshoot GEWSSE4220A0WW washing machine undrain problem?
    My washing machine stop functioning when the knob moves to the drain position.
    drtom4444's Avatar
    drtom4444 Posts: 3,282, Reputation: 145
    Ultra Member
     
    #2

    Jun 25, 2013, 12:05 PM
    I don't know what brand you have, but see this: https://dl.dropboxusercontent.com/u/...c%20washer.pdf
    If we knew what brand you have you could get the manual(s).
    jeff shiau's Avatar
    jeff shiau Posts: 3, Reputation: 1
    New Member
     
    #3

    Jun 25, 2013, 04:55 PM
    Quote Originally Posted by drtom4444 View Post
    I don't know what brand you have, but see this: https://dl.dropboxusercontent.com/u/...c%20washer.pdf
    If we knew what brand you have you could get the manual(s).
    Thank you for the valuable materials. I have resolved my problem by detaching hoses from the drain pump and found that the pump was clogged. After having the debris removed, it ran perfectly.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

No Cold Water to washing machine--new machine still has same problem [ 6 Answers ]

My washing machine stopped filling with cold water when necessary. Because it was an old machine and sometimes didn't spin out, I replaced it. The new (used) machine also doesn't have cold water. The valve works just fine, but has a little drip. Unless I am incredibly unlucky and have two...

Kenmore elite washing machine 110.16942500 troubleshoot? [ 1 Answers ]

I just bought a used Kenmore Elite top loader 110.16942500 and when I put it on the wash cycle, the water runs for about 5 seconds and stops. I can move the knob to the spin cycle and it will spin. Can anyone help me troubleshoot this problem?

Washing machine drain problem [ 1 Answers ]

When washing machine is done washing and starts to drain water from it... the water goes but will slowly build up in standpipe until it will flow over onto floor... if I run my garden hose down drain and standpipe it never backs up the pipe... I went to roof vent and run water down and water...

Washing machine problem [ 1 Answers ]

The rinse cycle is putting trash back into the water.

Washing Machine Drainage Problem [ 1 Answers ]

My KitchenAid washing machine wants to overflow out of the drainage pipe onto my floor when I do a load of laundry. I've tried putting drain declogger in the pipe. When I fill the washer with hot water to flush the declogger/clog out, the water flows out with no problem at all; however, when I do...


View more questions Search