 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
How do I fix the front element on my figidaire gallery (pglef387cs4) stove?
The front element is a double element with an inner and outer part. Both behave the same way. When I turn the element on high, it turns red and starts to heat up. However, before it gets really hot, it goes out again. About half a minute later it turns on and then off again. It should turn on and stay on. It seems to me that a thermostat must be malfunctioning and reporting that the element is too hot when it is not yet hot. Is there a thermostat or a sensor associated with the element that I can replace?
How would I get at the thermostat? How would I find its identity so as to order it from Frigidaire. I've been to their website and technical drawings but could not figure it out at all. They have all the parts numbered, but not named, so it's impossible to tell what to order. Thank you for any help. |
||||
Check out some similar questions!
How do I fix my electric stove of code E-1 F-3
[ 0 Answers ]
When I press start to heat up my stove it will throw this code E1 F3 how do I get it off
How do I fix my electric stove of code E-1 F-3
[ 0 Answers ]
How do I fix my electric oven of code E-1 F-3
Frigidaire Gallery Stove F1 fault code
[ 2 Answers ]
I have a Frigidaire Gallery Self Cleaning Convection oven (Model PGLEF387AB1 - Canada), with no operator manuals. (can't imagine why anyone would throw them out, but that's a different gripe!). Earlier this week, after a ~15 second power outage, the display showed error code "F1". Stovetop still...
Downdraft Stove oven element not working
[ 2 Answers ]
I have a Whirlpool Downdraft stove and the lower element has stopped heating up. I have the 'element' but I don't know how to install it. Do you have to remove the stove from the wall? I wouldn't think so, but I can't seem to find a way to install it from 'inside' the stove. Please...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
