Ask Experts Questions for FREE Help !
Ask
    MRDWRICH's Avatar
    MRDWRICH Posts: 5, Reputation: 1
    New Member
    		  
    #1

    Oct 19, 2007, 02:52 PM
    How do I change the heater fuse?
    I am an ametuer repair person with a simple possibly stupid question, I cannot open the Kenmore Elite dryer to change the heater fuse :confused: How does one open the back of the unit to view the heater fuse?
    esquire1's Avatar
    esquire1 Posts: 2,483, Reputation: 209
    Ultra Member
    		  
    #2

    Oct 19, 2007, 03:06 PM
    You must remove the 2 lint screen screws and raise. Remove 3 screws to the console and raise the lid.Remove the screws on back. You should noew be able to access the fuse. Any further hewlp, post back as there are 3 ways to opne kenmore units up
    esquire1's Avatar
    esquire1 Posts: 2,483, Reputation: 209
    Ultra Member
    		  
    #3

    Oct 19, 2007, 05:06 PM
    As I said, this isn't the only way to open unit up. I mention to post back for further help and happy to give it but do not appricate red marks for trying to help. You didn't even provide with a model # so I was justing guessing as to the model you have.
    MRDWRICH's Avatar
    MRDWRICH Posts: 5, Reputation: 1
    New Member
    		  
    #4

    Oct 19, 2007, 06:25 PM
    I apologize, I did not mean to give you a red flag. I tried to change my response, but it would not let me. Is there any way I can change a negative to a positive? You actually helped me tremendously and I am thankful for all the help that you gave me.
    Thank you,
    Dion
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Type H Fuse? [ 10 Answers ]

Me again,was told to buy a 30 amp disconnect for air conditioning unit.purchased an eaton/cutler hammer # 1 dpf221rp.it says it accepts class h fuses.cant seem to find anyone who knows what a class h fuse is.been to ace and home depot,can anyone help?? :confused:

Fuse blows [ 10 Answers ]

As soon as I turn the key to the on position the 30 amp fuse blows. I have a Craftsman 12.5 lawn tractor. The battery is new. I'm not sure what's wrong. Thanks for any advice. Jeff C.

Change Hot tub heater wiring [ 8 Answers ]

Gatsby spa is out of business, maybe for this reason. This is the wiring design I need to change it. By this diagram the heater is on whenever the thermostat says it is cold and 24 volts are supplied to the relays. Note the pump is not on. This design relies on the High limit switch to kill...

Looking for a Fuse [ 1 Answers ]

Can't find this fuse anywhere. I've checked ACE Hardware, Radio Shack and several sites on the web. BUSS AGA 3A 125V This fuse is the standard 1/4'' dia and 9/16" long. Any help will be appreciated.

Thermal Fuse [ 3 Answers ]

I have a whirlpool le2500xtw1 dryer, I bought used.it worked fine for about a month, then one day it would run but not heat. First thing I did was get a new element. But the problem was the thermal fuse was blown. The replacement package had a new thermostat as well as the fuse. After a few days of...

View more questions Search