 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
How to change thermostat kenmore he3 electric
Kenmore HE3 Electric Dryer will not heat. Have checked heater coil, thermostat, and thermo cut-off for continuity. It appears that the cut-off is not working. I have purchased replacement parts, but am unable to reach old parts to remove them. Could you tell me how to gain access?
|
||||
Check out some similar questions!
Kenmore Elite HE3 Electric dryer won't heat
[ 2 Answers ]
I have cleaned the lent traps and made sure there is good air flow with no obstructions in the vent. I have replaced the heating element and it still will not heat. Frustrated, can anyone tell me the nest step. Should I replace the High-limit thermostat. Thanks
Kenmore elite HE3 electric dryer won't heat.
[ 1 Answers ]
Any suggestions on repair? Air blows strong out of vent. Everything seems to work fine just no heat
Kenmore Electric Dryer Thermostat
[ 1 Answers ]
I am replacing the thermostat on a Kenmore electric dryer. I need to know which terminal the red wire goes on. There are 3 terminals numbered 1, 2 and 3.
Kenmore Elite HE3 Electric Dryer
[ 1 Answers ]
My dryer turn off all by itself. An error code of E1 appears. We press start/cancel and start the dryer again. After a few minutes it shuts off again displaying the error code once again. Help... :eek:
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
