Ask Experts Questions for FREE Help !
Ask
    laserjack's Avatar
    laserjack Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Mar 2, 2011, 10:28 PM
    How can I adjust the stop on my Geniee pro 88 garage opener
    Can I install an automatic stop?
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
    		  
    #2

    Mar 3, 2011, 07:51 AM

    If it doesn't have physical limit switches, it may sense the force, and the sensitivity may need to be adjusted.
    Does it stop short, not close?
    Binding or excessive friction could cause this change?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

My genie pro 88 does stop, it opens until it hits the opener itself. How can it stop? [ 0 Answers ]

Can I adjust the stop? Can I add an automatic stop?

Can't adjust downward pressure on garage door opener? [ 2 Answers ]

After replacing a worn/stripped main drive gear and worm gear, I can't seam to do anything to adjust the opener so the door will close. No matter what I do, it just goes down about a foot and then reverses and goes back up about 1-1/2 feet... then eventually stops at the upper limit. It never...

Garage door opener does not go all the way up [ 1 Answers ]

Hit button for door to go up and door only goes half way up

Genie pro 88 garage opener won't open completely and won't close [ 1 Answers ]

I have screw type genie pro88 model.It does not have sensors mounted at each side of the door.The door only open half then the door stopped (I have to hold the opener's bottom all the time).If I press the bottom again, the door go down couple inches then go forward couple inches. If I press it...

How do I sync the keyless pad garage door opener to the main garage door opener? [ 3 Answers ]

I mistakenly gave someone my garage door opener that didn't return it. I had a male friend come over and "change the code" including my car opener and gave me a universial which he also programmed. I came to realize my code for my keyless pad outside doesn't work (since he changed the code... )....

View more questions Search