My Kenmore Heavy Duty 60 Series Soft Heat Model 96565210will not heat on any setting. The dryer runs normally, it just won't heat at all. We did install a new heat element, and that would not heat up. Any help is appreciated!
Add your answer here.
Check out some similar questions!
Kenmore Dryer not heating [ 1 Answers ]
I'm working on my mothr in laws 10 yr old kenmore dryer that runs, but the heat element does not get hot. I have taken the element out found no breaks in it, it ohms good. I have 110 volts on both wires to the element. What am I missing ?
Kenmore Heavy Duty washer water leakage? [ 2 Answers ]
It would be wonderful if anyone can help. I have and old Kenmore heavy duty Washer, Model#c1104430081 canadian model. Problem starts as washer becomes full of water, leakage seems to occur between washer basin(if that's The correct term?) and adjacent metal connector. Leakage increases on...
Kenmore dryer heating problem [ 3 Answers ]
Iíve read through some of the post but have not actually found this questions. I have a Kenmore dryer that only heats when it is on the high heat/low heat setting. Any ideas?
Heavy duty webhosting question [ 4 Answers ]
Hi, I would like to start a site where people can listen to lots of audio programs. I believe that I need at least 2000GB of data transfer per month or more. I have googled but didn't find any dedicated servers that are giving more than 1500 GB of bandwidth. Can anyone suggest any good server....
View more questions Search