Ask Experts Questions for FREE Help !
Ask
    kevo1137's Avatar
    kevo1137 Posts: 1, Reputation: 1
    New Member
     
    #1

    Aug 18, 2011, 07:09 PM
    I have the Kenmore 1701,
    My washer just stopped while in I believe the rinse cycle, (I was asleep, so not sure). No lights come on. There is power getting to the switches. (I know a little bit about that stuff), I couldn't figure out why it stopped, All the switches seem good. I am wondering if there is a secret code for this issue too? Does anyone know? It is acting as if there is no power on it, but there is.
    Kev
    jgrella's Avatar
    jgrella Posts: 13, Reputation: 2
    New Member
     
    #2

    Aug 20, 2011, 08:33 PM
    Is this a toploader or frontloader?
    If it stops after the rinse cycle I would check the lid switch. You may have a bad lid switch which would prevent the washer from going into s pin and drain cycle.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Model # of Kenmore Elite Catalysts Washer set to Kenmore 110.60936990 dryer from 1999 [ 3 Answers ]

I am experiencing weird problems with my top of the line Kenmore Elite Catalysts washing machine. I bought the washer and dryer as a pair for about $1700 in 1999. The dryer model # is 110.60936990 but the sticker has worn off the washer so I do not know the model #. I think it could be...

Kenmore o/s [ 2 Answers ]

Hi, kenmore 110.82873120 will not compleat the drain and spin cycle. Motor humms and tries to turn agitator at first then stops. Of course this happens when I have been at work for the week and only have tow days to fix before I go back on shift please help:o :)

Kenmore refrigerator ice makerwhy does my kenmore icemaker won't get any water? [ 0 Answers ]

The water line got connected, and I made sure that it works, but it will not go pass the water line, is there a special wireing I need to know,, there are three little motors, but only two of them have a connection, (power supply),

Kenmore d/w still trying [ 0 Answers ]

To figure why red light flashing! I took three screws from bottom in order to pull out the filter and check for goop.But I cannot figure how to take the filter out:either glued or the "arm" at noon position in the way.Any suggestions my friend? Anyway:Sears never again:mad:.Back to reading all...

Kenmore 90 [ 0 Answers ]

My washer will not drain


View more questions Search