Ask Experts Questions for FREE Help !
Ask
    alan94596's Avatar
    alan94596 Posts: 1, Reputation: 1
    New Member
     
    #1

    Jun 9, 2012, 10:17 AM
    Have a 1750 and pressure has decreased and leak on the bottom of the washer...
    Powerwasher starts OK but pressure has decreased with a leak on the bottom of the washer. Don't know how to get to it to diagnose and fix?
    drtom4444's Avatar
    drtom4444 Posts: 3,282, Reputation: 145
    Ultra Member
     
    #2

    Jun 10, 2012, 09:07 AM
    Please give a better description of this unit and I can tell you what needs to be done. Take a picture and post it here so we can see it, please.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Husky power washer 1750 problems [ 4 Answers ]

My Husky power washer 1750 motor will not shut off. Motor runs continuously even after squeezing handle. I have not pressure with high pressure nozzle; however, the variable nozzle seems to have better pressure. Help!! Thanks, Melissa

Washer machine drainage pressure causing leak further down drainpipe? [ 4 Answers ]

The sink and washer drain pipes were rerouted from their original location and I believe it may have sprung a leak behind the wall. The sink has not been connected yet so I can't comment on regular drainage. I've used my washer/dryer a few times already and sometimes the water drains fine, and...

Decreased water pressure [ 2 Answers ]

We've lost water pressure at the kitchen faucet. What should we do?

Husky 1750 Power Washer has low HI Pressure. [ 3 Answers ]

This washer was working fine, then the Hi pressure was not as high as it was earlier in the day. Low pressure works fine, detergent draws fine and hi pressure kicks in but much lower than normal. Removed and cleaned all hoses and water screen. No clogs I could see. Owners manual mentions a by-pass...

Leak from bottom of pressure-assist toilet tank [ 7 Answers ]

I have a one piece Kohler pressure-assist toilet that is about 14 years old. Recently it started to leak from the bottom of the porcelain tank. It appears to be dripping from a metal bolt in that area. I imagine the pressurized tank or a fitting is leaking but I can't see that area when I remove...


View more questions Search