Ask Experts Questions for FREE Help !
Ask
    albbak's Avatar
    albbak Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Oct 13, 2011, 12:06 PM
    Has power but no lights and will not start
    Dishwasher Model 665 1348 it has power but no lights and will not work. I recently replaced the control board but this did not solve the problem. After replacing the control board it sounded like the motor started working but after a minute a green light came on and few seconds later it all stopped. It does nothing when pushing any button. Please help
    Thank you
    Rick
    arshad12's Avatar
    arshad12 Posts: 2, Reputation: 1
    New Member
    		  
    #2

    Nov 10, 2011, 10:04 AM
    1 watt is how mini amps
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Car will not start... lights do not dim when trying to start... do not hear a click. [ 3 Answers ]

Tried to start in nuetral and all other electrical items work anybody help?

93 ford explorer has power but won't start or try to start; is the starter dead? [ 1 Answers ]

Car won't start, no click and no power to radio, power window or locks [ 6 Answers ]

After installing a new starter on a 1999 2WD Explorer it will not start. There is no click when trying to start it, its just dead, and the radio, power locks/windows, a/c, and dash light don't work but the interior lights work and so do the headlights. We've had the starter checked to make sure...

Car will not start no power, then dash light come on but will not start [ 1 Answers ]

When attempt to start there is no power , radio has lost power and code has to be inputted. Light in dash pane come on and there is clicking when attempting to start but will not start. Battery is good.

How do I wire 6 recessed lights to 1 dimmer switch with 12-3 power and 12-2 to lights [ 1 Answers ]

How do I wire 6 recessed lights to 1 dimmer switch with 12-3 power wire source and 12-2 to between the 6 lights and then using 12-2 witing to the single pole switch?--need your help please

View more questions Search