Ask Experts Questions for FREE Help !
Ask
    jab48's Avatar
    jab48 Posts: 2, Reputation: 1
    New Member
     
    #1

    Sep 17, 2011, 07:31 AM
    Had F21 error. Now is 0:00 minutes on all the time
    Found no pluggage, all clear to the tub. Replaced the pressure switch & the drain pump-motor.Now is showing 0:00 minutes and it will not shut off. Can start either. All these happened several days after a complete cycle. Washer is KitchenAid KHWS02RWH3. Help!
    drtom4444's Avatar
    drtom4444 Posts: 3,282, Reputation: 145
    Ultra Member
     
    #2

    Sep 18, 2011, 05:22 AM
    Can you tell us a little more about the machine such as why you replaced the pump motor and pressure switch and the symptoms. Did the motor corrode out so it would not run or were the windings shorted or open? You need to download the service manual at: http://www.allrepairmanuals.com/kitchenaid-washer.htm?model_number=KHWS02RWH3 Then you will have more information. DrTom4444
    jab48's Avatar
    jab48 Posts: 2, Reputation: 1
    New Member
     
    #3

    Sep 19, 2011, 11:54 AM
    The technician sheets suggest that F21 could be pluggage in the drain which I checked (all is clear) if no pluggage replace the drain pump ( I replaced the drain pump & the pressure switch just in case but still no go). I downloaded the manual as you suggested and I checked all switches for their respective ohms readings, everything checks OK. The manual shows F21 as a possible LED panel & CCU communication trouble now I am totally confuse.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore Elite Washer Error Code F21 [ 5 Answers ]

My washer quit in the middle of a cycle and displays F21 error code. How do I fix this?

Whirlpool duet washing machine error f21 [ 1 Answers ]

What does the error code f21 mean on whirlpool duet washer

Furnace only works for about 30 minutes at a time [ 1 Answers ]

Ruud Deluxe Drum 90 Plus History: 3 weeks ago, the condensate trap clogged up, water flowed from around it and down the wiring into the compartment with the circuit board. None of the water touched the circuit board (that I am aware of) but it pooled on the bottom where the capacitor was...

Kenmore Elite HE 5t error code F21 [ 0 Answers ]

I got an error code F21 where my washer stopped spinning. I already checked the drain hose as suggested by the manual and everything is fine. I still have this error code 21 every time I tried to use my washer. What else would cause this code to appear and how do I fix it?

Kenore washer error f21 [ 0 Answers ]

I have a Kenmore He3t washer displaying error F21, how do I fix it?


View more questions Search