LED on the control stead on (normal -- no flashes). When set up the thermal stat, a call for heat seems clicking, then inducer fan is on, then seems gas is on for a few seconds. But the hot surface ignitor will not turn red. The process repeated...

I have a goodman gas unit. The igniter will glow red I can here the gas valve click and then I can hear the gas come on but it will not light. If put my finger in front of the burners I can feel the gas and I can also smell it. Can anyone help me thinks.

I have a 80% GMH8 goodman furnace that won't ignite. I can manually light it when the gas valve opens and it will run fine and shut off like normal. The glow plug ignitor doesn't come on but a couple of times I have saw it glow for a sec then go out way before the gas valve opens. The furnace was...

I have a Goodman GMS90904CXA thatwon't ignite. I switched my theromstat to heat and the vent fan came on but it did not ignite, I checked the unit and it was flashing 3 times(with vent fan running) I shut it down and did a startup procedure, same results.vent fan came on but did not light and still...

I have a Goodman GMPN080-4 Rev 4 furnace and it will not ignite. I believe the, not sure about the tech term, flat bar that turns red hot like a stove coil has gone bad (it does nothing). I see a red LED light on the computer type panel blink 3 quick, 2 sec pause, 3 quick, 2 sec pause and so on....