Ask Experts Questions for FREE Help !
Ask
    zonian's Avatar
    zonian Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Mar 9, 2010, 10:38 PM
    Ge washer will not spin if load is too heavy
    I have a GE profile Washer 1999 model wasr3110w2aa. The washer will not spin with a load of towels however will operate with a lighter load. I just installed a new clutch and belt and the same problem exists. The lid switch seems to be working. If I lift the tub an inch or so it seems to want to spin. I am out of ideas since it doesn't seem to be electrical issue. Oh yes, I can see the motor shaft spinning but the pulleys and belt are not, even with the new clutch.

Check out some similar questions!

Kenmore Elite Washer does not spin heavy loads [ 3 Answers ]

We have a Kenmore Elite 23022101 washer. It spins and drains fine with light loads. With heavier loads like bath towels, it does not spin at all. When we remove the towels and break it up into 1/3 loads, it works fine. The washer is about 4 years old and up to now was able to wash these heavy loads.

Kenmore front load washer won't agitate/spin if load too heavy [ 2 Answers ]

My Kenmore front loading washer, model 417.43042200, won't agitate or spin to complete the cycle if the load is too heavy, such as 5 bath towels. If I take off the back and help turn the drum in the agitate or spin mode it will agitate/spin and complete the cycle. The pump still drains the tub. If...

Kenmore Elite Top load Heavy Duty King Size Capacity Washerwill not agitate or spin [ 1 Answers ]

During a cycle, I smelled something burning. A fuse was thrown and the washer stopped running. When I flipped the power back on and tried to restart the washer (at the spin cycle) there is only a slight humming sound and no movement. The washer will fill but will not agitate. Spin or empty. The...

View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.