 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
GE top load waher with water under the tub
I did a load of wash and after the cycle had completed I noticed water on the floor. I removed all of the clothes and moved the tub back and forth and could hear water swishing. How do I get the water out? How do you remove the front panel? It is a GE top loading sensor washer model Nuber WPSR4130WOWN
|
||||
|
||||
|
First have a look at the waterfilter : most probably it is blocked. Expect a lot of water to come out, so have some bucket and other plastic boxes available to collect the water.
If that fails and as you failed to provide any type number, please read the service manual instructions, available from Sears. (The Sears website - Service) |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
I have a Whirlpool Washer apporx. 12 years old. At first the washer would not spin, so I replaced the motor coupler. I was able to get one load of laundry done. The second load of laundry I had problems. On Fill cycle the water started filling the washer, but it never moved to the next cycle and...
HI My washer is 3 years old.It started keeping a lot of noise at first. It fills up and drains but it does not spin or agitate. Yesterday it washed but not spin. Today it is not spinning or washing. Help
I have a pier and beam lake house that uses a gate valve for the main water shut off. It leaks and I want to replace it. What is the best kind of valve to use for this? Ball or gate or other. It will be installed in a PVC line.
Why is my hot water not working in the kitchen
The two hot water heater thermostats are set at 120 deg. F. Occasionally the high temperature limit switch will trip. What can cause this?
View more questions Search
|
