Ask Experts Questions for FREE Help !
Ask
    beck1's Avatar
    beck1 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 2, 2009, 07:04 PM
    Ge front load washer won't spin
    I have a 2003 model ge front load washer. I noticed that my clothes were wet after running . I tried to restart washer and washer would not spin but will drain. Any suggestions. Could it need new motor?
    Flying Blue Eagle's Avatar
    Flying Blue Eagle Posts: 2,056, Reputation: 225
    Ultra Member
    		  
    #2

    Jun 4, 2009, 10:50 PM

    beck1- here is some causes of this problem:: #1- door is not closed good:: the door switch is out of adjustment<broken<or defective;; #2-
    The spin soleniold is defective:: note- check out the above and if they are ok come back on to this post and let me know and i will lead you through the testing of the other parts that could be the cause :: you will need a { volt-ohm meter} to do the testing;; you csan get one from lowe's or home depot in the electrical dept. for about $15.00 ; get one that you could test at the least 250 volts a/c power;; good luck and god bless ::f.b.e.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore front load washer won't agitate/spin if load too heavy [ 2 Answers ]

My Kenmore front loading washer, model 417.43042200, won't agitate or spin to complete the cycle if the load is too heavy, such as 5 bath towels. If I take off the back and help turn the drum in the agitate or spin mode it will agitate/spin and complete the cycle. The pump still drains the tub. If...

Front load washer doesn't drain or spin [ 1 Answers ]

I have a kenmore front load washer that's 2 years old it doesn't drain or spin please help need answers thanks

View more questions Search