Ask Experts Questions for FREE Help !
Ask
    DABS311's Avatar
    DABS311 Posts: 2, Reputation: 1
    New Member
     
    #1

    Jun 11, 2011, 12:35 PM
    GE DBXR453ET2WW - Front drum bearing worn out.
    What would cause the top front drum bearing to wear completely through on the top side? I replaced the 2 green and 2 white slides on the bearing a couple of months back after replacing the rear bearing, but now it appears the whole top center of the drum bearing is missing between the slides. Did I miss something while putting it back together? Thanks
    lrsilvas's Avatar
    lrsilvas Posts: 8, Reputation: 2
    New Member
     
    #2

    Jun 11, 2011, 05:35 PM
    I am not sure if the model you show has bearings, but are you talking about a model that has bearings at the front??
    I never see that in a drum, this model has a back bearing that is more a ball and snap in a plastic bracket, when you cange the ball, change the bracket and all the parts associated at that.

    Luis

    Bear Licnese in California, Appliances Specialist, East Bay San francisco Area

    Free consultation at
    925 705 0856
    DABS311's Avatar
    DABS311 Posts: 2, Reputation: 1
    New Member
     
    #3

    Jun 11, 2011, 09:39 PM
    http://www.appliance-parts-warehouse.com/general-electric-parts/General-Electric-Dryer-Parts/General-Electric-Parts-DBXR453ET2WW/General-Electric-Parts-4054.cfm

    As you can see from the link, part #313 is called a bearing drum... aka drum bearing. It wore through on the top only. I believe it just unsnapped from the cabinet. That's the only explanation I can see. I'll stick it back together and try it again.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Is there a way to check dryer drum roller bearing w/o removing the drum? [ 0 Answers ]

Dryer makes a tapping noise when you turn it on, doesn't make noise when you hand turn it. Have taken apart and check for any item that might be stuck to belt or roller w/o removing the drum. All check out okay. Believe it is a roller bearing but can't determine which one, have not taken drum off....

How to replace ge dryer drum bearing [ 0 Answers ]

Want to replace drum bearing to my dryer

How do I replace rear drum bearing? [ 1 Answers ]

How do I replace a rear drum bearing on a GE gas clothes dryer?


View more questions Search