 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
The easiest thing to look for and remedy is to see if the "Fan" switch (look at the upper right part) on the thermostat is set to ON instead of AUTO. Your thermostat is probably different, but should have a similar switch. The other option is a short in the fan circuit :( Hope it is the switch! WallyH |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
(Nordyne/Miller G3RA)-I have a furnace HSI(glow plug) that will ignite and burn until it gets too hot and shuts down. As soon as the furnace shuts down the blower starts to circulate air. The blower circulating air cools the furnace and it reignites.Shortly after the furnace ignites the blower...
My Trane (model# TUX080C942C1) direct drive frunace blower motor became hot after a few minutes of runtime. I could smell the odor of warm insulation through the register vents. The motor was running but it didn't seem to be up to speed. The squirrel cage turns freely. This unit is only 8 years...
When the thermostat is off why does the furnace blower continue to run?
My furnace blower won't stop running can you please tell me what the problem may be?
Been searching but so far I haven't found any information that really helps me. I've lived in this house for about a year and a half now, it has the original furance in it(house was built in the 70's I blelieve). Last year the furnace worked fine, and had worked fine so far this year. I live in...
View more questions Search
|
