 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Fault " f dl " loose/bad connection or bad "control/ccu" Kenmore HE4T washer
Trying to determine if Fault " f dl " is loose-bad connection or bad "control-CCU" on Kenmore HE4T washer. As plomero posted in Feb , I have replaced the door latch mech. And still receive the fault... noting what mscreations posted in repile I wiggled the 4 prong at the ccu while it was in the six try latch proving cycle and it will start every time that is done. It still will not run every time unless this is done, say 6 times one fail. Is this just needing a better connection as I pulled the cover of the ccu and when the plug is manipulated the board has no movement, or is the device on the board which the 4 prong plugs into more than just a "jack"?
|
||||
Check out some similar questions!
I have an Elite He 4T frontloading washing machine, it is almost 3 years old - no more warranty! It has been giving me the F 02 error code, which is "Drain Problem". There are no items in the drain on the inside of the machine, I tookoff the hose it is clear. I stuck a wire hanger down the opening...
About 3 weeks ago we started cuddling and holding hands but he says he's not my boyfriend (and seems to have no intention of changing that) I talk a lot about my cousin in another country, and she's visiting me next week. I want them to meet because I'm always talking to my cousin about him (liked...
I bought a new hot water heater last month and when the guy installed it and switched on the power, he said it didn't immediately work (second try it worked).. that maybe there was a breaker problem... now it's been a month and every now and then there isn't enough hot water... it has never run out...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
