Ask Experts Questions for FREE Help !
Ask
    Frank Arnold's Avatar
    Frank Arnold Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Mar 17, 2014, 04:01 PM
    Electrolux vacuum motor
    Model AP280 sequence to reassemble motor
    drtom4444's Avatar
    drtom4444 Posts: 3,282, Reputation: 145
    Ultra Member
    		  
    #2

    Mar 18, 2014, 09:41 AM
    You first push in the brushes and put a piece of wire through the holes in the sides of the holders to keep them in while you reassemble it. Then you pull out the wires, so you need to have the wires long enough to reach the outside of the motor. Just make sure the two halves are lined up correctly and you should have no problems.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Electrolux water dispenser [ 1 Answers ]

When I use the water dispenser, the valve sometimes stays open. I noticed a calcium/lime build up. How can I clean this off to see if that is the problem?

What the difference vacuum relief valve/ vacuum breaker for water heater? [ 1 Answers ]

What is the difference between vacuum relief valve and a vacuum breaker valve

How vacuum is maintained in a vacuum circuit breaker [ 0 Answers ]

In industries we use vacuum circuit breaker to disconnect supply in a faulty condition. But how vacuum is maintained for a long term use of circuit breaker?

Electrolux vacuum [ 2 Answers ]

I want to purchase an electrolux vacuum locally. I think circuit city carry them. I tried to go to the electrolux site to find local dealers, but unable to be directed from their site to do so. Can anyone help me? My zip code is 63461 thanks:eek:

Parts or replacement for Vacuum windshiel wiper motor [ 1 Answers ]

Does anyone know where I can find parts for a replacement vacuum windshiels wiper motor for a 1950 vintage international dump truck

View more questions Search