Ask Experts Questions for FREE Help !
Ask
    kscooper's Avatar
    kscooper Posts: 2, Reputation: 1
    New Member
    		  
    #1

    Nov 21, 2013, 08:04 AM
    My dryer won't start. Even after replacing the motor..
    I have a Kenmoore model # 110.66642500 dryer. The day it went out completely, it had been running for 5-10 minutes and shutting off. Then, it wouldn't start at all the next day. I bought a motor offline (used) and replaced it. It's still not turning on. Four days of laundry in a five family home, laundry is piling high and I'm out of ideas. Any answers would be great. I can't afford a new or used dryer.
    hkstroud's Avatar
    hkstroud Posts: 11,929, Reputation: 899
    Home Improvement & Construction Expert
    		  
    #2

    Nov 21, 2013, 10:21 AM
    http://www.searspartsdirect.com/part...od=11066642500

    Check part number 59
    drtom4444's Avatar
    drtom4444 Posts: 3,282, Reputation: 145
    Ultra Member
    		  
    #3

    Nov 22, 2013, 03:10 PM
    What was wrong with the motor that you replaced? Did it have a blown winding or was it grounded? There are many reasons that will keep a motor from running. What have you done to troubleshoot it with a meter? Look at these manuals: https://dl.dropboxusercontent.com/u/...%20Manuals.zip
    https://dl.dropboxusercontent.com/u/...e%20Manual.pdf
    https://dl.dropboxusercontent.com/u/...DryerMotor.pdf
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore Electric Dryer Series 80 start button - won't start [ 7 Answers ]

Tonight I replaced the Door Switch - easy enough - and the inside light works once again. But now the push button to start the dryer does not work. Do I need to replace the blower box fuse and thermal fuse? What I thought began as a quick fix has now become a mystery. Can You Help ? Model...

My Whirlpool Senseon gas dryer won't start up when I press the Start button? [ 1 Answers ]

My dryer doesn't start when I press the Start button. It just hums. Start capacitor bad?

How to change door switch AP4319999 on maytag neptune dryer. Dryer won't start [ 2 Answers ]

Gas furnace blower motor won't start/slow to start [ 0 Answers ]

I have a airtemp probably 70's model we had to replace the blower motor about two years ago. Now when the fan is supposed to start it either won't start or is very slow to start. When this happens you can manually move the squirrel cage and it runs great through the complete cycle. We just replaced...

Fan Motor won't start, AC and Heat won't come on [ 7 Answers ]

My AC won't come on and the fan won't start unless I push in the reset button on the furnace's high limit switch.When I push in the button, it runs continuously, but still no AC or heat. At first, it tried to run but it chugged like it was being turned on and off really quickly, then it finally...

View more questions Search