Ask Experts Questions for FREE Help !
Ask
    dryerinny's Avatar
    dryerinny Posts: 9, Reputation: 1
    New Member
     
    #1

    Sep 19, 2011, 06:41 AM
    Dryer will not heat up
    Ok start the dryer the ignitor glows the burner lights then in about 15 to 30 secs they go out I tested the flame sensor on a digital multimeter set at 200 oms and it reads 1.0 to 0.9 so is that part good and if so is it then the ignitor or the gas valve coils thanks

Check out some similar questions!

Kenmore dryer won't heat.changed the heat element+thermal fuse.still won't heat [ 1 Answers ]

Kenmore dryer(110.96582100) is 15 years old. Worked great until it stopped heating. Actually it started taking longer and longer to dry the clothes. But now it won't heat at all. I've changed the heating element and thermal fuse. Could it be the thermistor or high limit thermostat? Don't want...

Kenmore Model 417.94712400 stackable washer/dryer; dryer doesn't heat up. [ 4 Answers ]

Dryer drum rotates, and it responds to the "cycles" dial, but the heating element doesn't heat up. Is there a reset button somewhere, or do I need to replace the heating element, OR? Thank you.

I have a frigidaire dryer model number FEQ1442ESO. The dryer runs but doesn't heat. [ 0 Answers ]

I'm guessing the thermal limiter is bad, but can't figure out how to get to it.

Dining room circuit only works while dryer is running, Dryer doesn't heat up? [ 7 Answers ]

Old house with knob and tube wiring. Dryer has 3wire w/ground. 60 Amp Fuse Box. With the lack of circuits there is a lot of fuses blown. Friend/owner has upped the fuses all to 30 amps and has been warned of the dangers associated. Dining works normally some of te time, but at different periods it...


View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.