Not sure why when I turn on my AC the unit comes on. When I flip it to heat, nothing happens. It worked the other night and I stayed warm. Woke up this morning freezing. Anyone have any ideas... suggestions?? I checked the breaker box and nothing was tripped. Thanks!

I have a 1997ish intertherm A/C unit, when the Air is on the blower works fine, but when I switch to heat or fan only the blower will not work? I have bought a new blower relay & capacitors. I tested the sequencers for 240 & 24 volt, everything is reading good. I am at a loss, does anyone have...

Yes I have a kenmore dryer that I bought out of a classified add Model number 110.86870100 I reset the breaker and made sure it was on heat not air but it still won't work I checked to see if there was any air flow coming out of the vent there is though I don't know how much air should be coming...

Model number 11063932101 - The element will not heat, but the drum will rotate, interior light comes on, etc. I have checked the two circuit breakers - OK! I have done a continuity check on the heater element, thermal cut-off, thermostat and thermal fuse. All pass the continuity check. Also, I...

A couple of weeks ago my Lennox G20Q3E-75-1 was acting up. Gas valve was cycling when calling for heat and then once satisfied and the main burners went out the pilot light was staying lit. I thought it might be the flame sensor as far as the gas valve cycling and didn't want to tear into it so I...