Ask Experts Questions for FREE Help !
Ask
    Jdarenz's Avatar
    Jdarenz Posts: 1, Reputation: 1
    New Member
     
    #1

    Jul 31, 2010, 01:52 PM
    Dryer issues
    Old sears kenmore. Worked fine for last 18 years, but today just stopped. On fourth load this AM drying fine, adequate heat. Changed load , cleaned lint trap, set setting, pushed start and nothing. Checked door, clear, and safety switch seems opperative.
    Checked breaker, no issue. Checked voltage at plug, no issues. Have power to setting knob, (120V X2) What do you think?

Check out some similar questions!

Frigidaire dryer issues [ 0 Answers ]

I have a Frigidaire dryer model FDE437GHS0 which has worked fine until now, it stopped working and now when I turn the timer switch to time dry and push the start button it sounds like the timer switch is moving. If I turn it to the automatic setting some spots on the timer switch sticks and there...

Dryer Issues [ 2 Answers ]

I have a kenmore catalyst dryer about 3 to 5 yeas old. It just started to default to the high dry cycle/check lint screen flashing/constant beep until dry cycle is completed/and will not allow to change to any other settings. I pulled the plug overnight hoping that it will recycle itself but did...

Kenmore Dryer Issues [ 1 Answers ]

I have a kenmore dryer model # 110.74952300 i moved it recently and now it won't heat. Is there a pilot and if so where is it and how do i light it? Help!:(

Kenmore dryer issues [ 4 Answers ]

I have a Kenmore dryer that has stopped heating. I got a multimeter and tested thermostats, fuses, and the element. Everything has a reading but the high temp thermostat, so I am assuming this is the issue. My question is I looked at it and the thing has a rivet holding it in. How would I go about...


View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.