Ask Experts Questions for FREE Help !
Ask
    lost222's Avatar
    lost222 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Aug 14, 2016, 11:37 AM
    Dishwasher Tub won't drain all the way
    Kenmore 665.13259k113 leaves water in tub when done. I was told by service man it was the drain pump. I replaced it with new one from Sears, same problem. I prewash everything in sink before use, all lines and filters are clean. What I see is during the wash cycles when it is suppose to drain, it partially drains and continues same for rinse etc. When complete I have to use the Drain and Cancel two to three times to rid the water in the tub. Again no blockage in drain tube. I have even cut the drain line from the pump, spliced in another line into a bucket and watched the amount of water draining. It is only the force of a pencil stream of water. The pump seems to run a complete cycle but the amount of water removed is very little. What's the chances of the new pump being bad or equal to the old pump? I've even had the pumps out and started the Drain cycle it seems to work fine. Does anything else control the cycle? The optic eye seems to control the dirtiness of the water. Any suggestions
    joypulv's Avatar
    joypulv Posts: 21,591, Reputation: 2941
    current pert
    		  
    #2

    Aug 15, 2016, 03:51 AM
    I wish someone would answer this!
    talaniman's Avatar
    talaniman Posts: 54,327, Reputation: 10855
    Expert
    		  
    #3

    Aug 15, 2016, 09:55 AM
    Lets start here,

    Kenmore Dishwasher Displaying Fault Code C2 - Model 665.13259K113 - Repair Parts - RepairClinic.com

    You have an option of trouble shooting so choose "will not drain" video

    And go here, with the link they provide (added below)

    https://www.youtube.com/playlist?lis...791DCB7F00C3FC

    Tell us what you find please.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

My new toe-touch bath drain won't click to open/drain tub... what can do? [ 2 Answers ]

I installed brand new tub with toe touch drain, drain closes fine, but is almost impossible to open. Removed drain plug unit and unit is extremely difficult to get it to click to open, yet clicks to close (stop drainage) every time. I happen to have another toe touch drain plug/unit from another...

Dishwasher caused sink next to it to fill with water and also dishwasher won't drain [ 2 Answers ]

I think my title says it all... I ran the dishwasher and the sink next to it (which happens to be side connected to the garbage disposal) filled up with water. The dishwasher also leaked at the end because the water overflowed onto the floor... dishwasher did not drain itself. I emptied the...

Dishwasher won't drain [ 0 Answers ]

Kenmore ultra wash dishwasher will not drain. How can I solve this?

Dishwasher won't Drain [ 2 Answers ]

I have a GE profile dishwasher. The repairman has been to my house 3 times. The first time he cleaned the filter. The second time he said it needed a new pump and the third time he came to install the pump. He then left and the dishwasher completed the cycle buy the water remained. I took matters...

Noise/smell from tub drain when dishwasher running [ 1 Answers ]

We've noticed a rotten egg type smell coming from our bathroom. Upon further investigation it appears to be coming from the bathtub drain. Further, it only does this when the dishwasher is running and sometimes when the washing machine is running. You can also hear a noise (gurgling?) coming...

View more questions Search