Ask Experts Questions for FREE Help !
Ask
    DougGent's Avatar
    DougGent Posts: 1, Reputation: 1
    New Member
     
    #1

    Oct 8, 2011, 07:03 AM
    Diagnostics mode ge psh25?
    Hello,
    I have a GE PSH25PSSA SV refrigerator and it is not holding temperature. The freezer bounces from 0 deg to 12 deg, and the fresh food section varies from 37 to 42 deg. I replaced the evaporator thermister and the defrost thermostat... no good. Is there a diagnostic mode for this fridge? If so, how do I enter it and what are the codes?

    Thanks for your time,

    Doug G
    drtom4444's Avatar
    drtom4444 Posts: 3,282, Reputation: 145
    Ultra Member
     
    #2

    Oct 9, 2011, 09:09 PM
    Check under the unit for dirty condenser coils. That's what seems to be the problem. You have to clean them every six months. This is best done by washing them off with a spray of water and spray cleaner, and clean the fan as well. You will have to unplug it and vacuum it out then wash off the coils keeping water out of the motor. The fan blade comes off easily for cleaning. The coils must stay very clean all the time. DrTom4444

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Bryant gas pack works in cooling mode but doesn't work in heating mode? [ 2 Answers ]

Pretty much what the title states, I have a Bryant gas pack that operates like normal when it is in cooling mode, but once the thermostat calls for heat, the system shuts down completely. Even the fan doesn't work. Can anyone list the possible reasons this would happen?

My laptop doesn't work in the normal mode but works in the safe mode [ 8 Answers ]

Hello I need a help here My laptop was working fine until suddenly started to freeze . Now, It doesn't work and nothing could be opened; (software, browsers, PDF files, folders, icons, even the task manager and the start button do not work. But, in the safe mode it is working fine and now I am...

Blower motor won't turn on in automatic mode it only turns on in manual mode [ 4 Answers ]

I have a ruud furnace and it won't turn on when set on "auto" mode,its only turning on in "manual" mode and blows heat.The fan turns on when put in the "on"/"fan" mode. I have to turn it off manually once the rooms have reached the desired temp.I could here the blowers start than they shut off...

Blower motor won't shut off in heat mode but works fine in A/C mode [ 0 Answers ]

I have an older lennox unit that is pilot light. The blower motor won't shut off when the temp is reached on the thermostat but it works fine in ac mode. What could cause this? I'm confused because it worked 2 weeks ago when I turned my ac off and the thermostat is in auto and only shuts off when I...


View more questions Search