 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Ceiling fan speed issue
I have a ceiling fan which was working fine in various speed by adjusting the fan regulator. Recently the fan speed became so low even if I turn regulator to full speed. So I came to know that the capacitor of ceiling fan is having a complaint and I replaced the capacitor with a new one. After replacing the capacitor, the fan is in full speed when regulator set to maximum but when I bring down the speed by adjusting the regulator, the speed of fan is too low and almost in same speed in all regulator position other than maximum. Why?
|
||||
Check out some similar questions!
I just installed a Harbor Breeze Dual Ceiling Fan & Light Control Switch and am having the following problem: when I have both the lights and ceiling fan on, the lights flicker most of the time when I change the speed of the fan. What is causing this? Did I incorrectly wire the fan or is the type...
This fan has worked fine without any problem for years? Remote switch play a part?
I have a 3 speed ceiling fan with a pull chain and it is operated by 2 wall switches. I can only get it to operate at the slowest speed even when I try pulling the chain to change speeds. When I pull for what should be the medium or fast speed, it stops. Any ideas? Thanks
The pull chain controlling the fan speed snapped off inside the unit. How much disassembly is required to replace it?
I have a 3 speed Hunter ceiling that I rarely turn off and all 3 speeds had been working. I recently turned it off and when I turned it back on, only the high speed is working. I assumed the switch was bad and replaced it. I still only have the High speed. Has anyone had this problem before? ...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
