Ask Experts Questions for FREE Help !
Ask
    sola_a3's Avatar
    sola_a3 Posts: 10, Reputation: 1
    New Member
    		  
    #1

    Jul 5, 2011, 11:47 AM
    Can I connect my maytag 120/240 washer/dryer combo to a 240 power source?
    Maytag 120/240 combo
    ma0641's Avatar
    ma0641 Posts: 15,675, Reputation: 1012
    Uber Member
    		  
    #2

    Jul 5, 2011, 01:36 PM
    How many wires in the outlet box and what is the wall outlet configuration? How did you determine it is a 240 VAC power source?
    drtom4444's Avatar
    drtom4444 Posts: 3,282, Reputation: 145
    Ultra Member
    		  
    #3

    Jul 5, 2011, 09:43 PM
    What does the tag require for voltage? DrTom4444
    sola_a3's Avatar
    sola_a3 Posts: 10, Reputation: 1
    New Member
    		  
    #4

    Jul 6, 2011, 07:58 AM
    There are 3 wires in the outllet box ,a 3 prong plug... and the general power supply is 220-240volts . But the washer/dryer unit is 120/240v .
    drtom4444's Avatar
    drtom4444 Posts: 3,282, Reputation: 145
    Ultra Member
    		  
    #5

    Jul 6, 2011, 04:52 PM
    Then you have to supply the proper voltage to each appliance. 240 goes to drier and 120 to washer. DrTom4444
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Can maytag 120/240 work with 240v power supply? [ 15 Answers ]

My power supply is 240v ,bu I have a maytag 120/240 combo

Power is 120/208/240 and I need to convert to 120/240 [ 1 Answers ]

I have a box with 3 wires coming in, 1 Grnd, 1 120vac, & 1 208 vac (240 vac across the 2) I need to change the plug to a residential plug for a dryer (3 wire - 1 Nutrl, 2 120 vac (240 across the 2). How do I do this? Is it even possible?

Problems with 120 and 240 power [ 7 Answers ]

This morning some of my 120 outlets didn't work then later they did also the burner on my stove would get warm but not hot dryer also spins but doesn't get hot when I checked the breaker for the dryer is seemed all right I checked both wires going into the breaker at the same time got nothing but...

Connecting washer 120 to dryer 240 [ 4 Answers ]

Hello, My Washer and Dryer are Stackable, a 120 plug for washer and 240 for dryer. I only have a 240 receptacle in my laundry room nook. Would it be possible to pigtail or tie in my washer to the dryer's 240 panel located at the back of the unit? Currently when I open the back of the dryer I...

2 wire 240 connect to 3 wire 120/240 [ 2 Answers ]

I am in the process of hooking up a new Electric Range. It has a three wire connector terminal block ). My existing wiring is 1970's vintage alum, but inspected and in good condition. The existing wire in 8 gauge two wire (black and white) plus ground. Do I have to run a new wire all the...

View more questions Search